Silicone T-Hose, 25mm (1.00") ID w/25mm (1") ID Branch 38mm These 90 degree reducer elbow

These 90 degree reducer elbow hoses have a 63mm ID at one end and a 51mm ID at the other end to connect a 2 1/2" OD tube to a 2" OD tube

but it will not stand up to continuous exposure to liquid petroleum

35" long overall

Install the aluminum joiner in the lower hose and secure with one small hose clamp

5mm wall thickness (125mm / 5" and 100mm / 3 15/16" OD) and a working pressure rating over 12 psi (64 psi burst pressure)

Silicone T-Hose, 25mm (1.00") ID w/25mm (1") ID Branch 38mm These 90 degree reducer elbowOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These special Tees measure approximately 4 inches long on the run with a 1" ID branch measuring approximately 1. 5" long. Use with our 1" OD